Visit our tractor and agricultural equipment communities:

Ingersoll Forum Case IH Forum Combine Forum Hay Forum

JCB Forum John Deere Forum Kubota Forum Mahindra Forum

Massey Ferguson Talk New Holland Forum Valtra Forum Yanmar Forum

Zetor Forum Farming Forum

Reply to thread

Help Support SkidSteer Forum:

Message: <blockquote data-quote="dfriend" data-source="post: 98283" data-attributes="member: 7551"><p>I am sure this isn't the first post about this, but every search I tried returned no answers. Here's the issue: Bobcat 751 with rectangular headlights. The machine had a leak off the control block, after several hours of contorting, I finally got it sealed up and no more leak. It would start up, and as it was running, the pump had a grinding sound like it was loading up, but all functions worked. Neighbor borrowed the machine to do some light grading, and it broke down over at his house. I got the machine home, and started to look into the issue, but nothing was happening, no movement in the wheels and no motion in the arms or the bucket. Left the machine sitting for a month or so and went off doing other projects, and came back to it. For the first 30 seconds that I fired the machine up, the grinding sound in the pump was back, and I was able to tilt the bucket to where the teeth were off the ground, but no lift and no movement in the wheels. And then the grinding sound went away and no more tilt either. Hydraulic oil is half way up the dipstick. The lap bar light and the traction light both come on constant, but the other two lights the seat and the arms light blink twice. Is this electrical? Is no noise from the pump a sign that the pump is shot? Or what?? I am at a loss. If there are other posts about this, and hopefully about solutions, please point me in that direction. Thanks</p></blockquote><p></p>

Verification