751 forward drive and turning

Skidsteer Forum - Bobcat, New Holland, Case, John Deere

Help Support Skidsteer:

Hacksawjoe

Member
Joined
Dec 8, 2010
Messages
16
Hi looking for knowledge. My 751 the arms to go forward the left side is strong forward and reverse the right side is very weak in forward but very strong in reverse.Any help or ideas.Im not a bobcat mechanic but just took off my injector pump and replaced it and new belts also. learning as i go with advice on this site.Thank you for any help
 
Its possible a relief is bad in the pump that controls the right forward movement. It could also be a bad pressure seal in the drive motor allowing the oil to by-pass. You can try swapping drive motors, see if the problem also moves. If it does, its a motor, if not its a relief/pump issue.
 
Thanks Tazza i was looking through the manual and it said that the hydropump replenishing valve isnt seating or the steering linkage needs adjustment do you think this could be the problem or not.Thanks for your time and trouble im new with this.
 
Thanks Tazza i was looking through the manual and it said that the hydropump replenishing valve isnt seating or the steering linkage needs adjustment do you think this could be the problem or not.Thanks for your time and trouble im new with this.
Its possible. If you had low power in both forward and reverse i would lean towards pump wear, but only one side generally is a relief or motor seal/shuttle valve.
 
What you could do, is reverse the hoses to the drive motor you think might be the problem, and see if it changes. I'm thinking it's a drive motor, with maybe a cracked gallery bypassing.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.

Latest posts

Back
Top