Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
743B won't start
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="mrfixitpaul" data-source="post: 31193" data-attributes="member: 2582"><p>There should be 2 relays or solenoids in the engine compartment. 1 is for the glow plugs, the other is for the starter. A quick test to make sure the starter has not failed is to use a jumper wire and jump from the big terminal on the starter to the small terminal on the starter that has a wire connected to it...as long as there is power getting to the starter and a good ground the starter should crank. When in the 'start' position the key should activate the starter relay which in turn activates the glow plugs. If you are hearing no click check for power getting from the key switch to the relay in the start key position....I think it's a white wire but not sure.</p></blockquote><p></p>
[QUOTE="mrfixitpaul, post: 31193, member: 2582"] There should be 2 relays or solenoids in the engine compartment. 1 is for the glow plugs, the other is for the starter. A quick test to make sure the starter has not failed is to use a jumper wire and jump from the big terminal on the starter to the small terminal on the starter that has a wire connected to it...as long as there is power getting to the starter and a good ground the starter should crank. When in the 'start' position the key should activate the starter relay which in turn activates the glow plugs. If you are hearing no click check for power getting from the key switch to the relay in the start key position....I think it's a white wire but not sure. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
743B won't start
Top