Reply to thread

Message: <blockquote data-quote="ward" data-source="post: 138220" data-attributes="member: 25583"><p>Air will always move more freely than oil, if the tank has a port fitting you will need to  replace the o ring to ensure a good seal. If it is a pipe thread fitting that is a 90 it may be a swivel style that could be worn out by vibration,  I know the John Deere that I worked on also was not leaking persay but was damp from oil, hydraulics can be strange at times. The line was about 1.5" to 1.75od.</p></blockquote><p></p>