Reply to thread

Message: <blockquote data-quote="kap258" data-source="post: 4675" data-attributes="member: 651"><p>I finally had a chance to get the engine out. I found that the 4 bolts that attach the u-joint to the flywheel have snapped. I suppose the u-joint failed then the bolts were sheered off. It took me about an hour and half to get the engine out, so I would say it is probably worth pulling the engine every 250 hours to grease these fittings. I would much rather do this than have to replace the rear end of the hydrostat.</p></blockquote><p></p>