Reply to thread

Message: <blockquote data-quote="KDM" data-source="post: 17165" data-attributes="member: 1777"><p>Just an update. The longer bolt didn't do me much good because of limited clearance but was able to get the sprockets on far enough to use the regular bolts. Found it best with limited clearance to grab the bottom of the sprocket and just push it back. The chain then help lift it and wasn't as much trouble as I thought locating it on the axle splines. Ran about 20 hours with no leaks before the side of the motor blew out. Does a V2203 motor fit without modifications?</p></blockquote><p></p>