Reply to thread

Message: <blockquote data-quote="Centurion" data-source="post: 16636" data-attributes="member: 1813"><p>Ok, I looked under the cab. I found two sending units. The one on the top, has power to it, but it does not go through the unit. The one that appears to be the problem is the one on the top, near the vickers unit. It has two wires attached, using a meter, I read about 9V, I see no continuity going through the connection. The sender down on the side is one wire type, and shows continuity to ground. Where do I go from here. It appears that the unit on the top is bad.</p></blockquote><p></p>