Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
743 hydraulic controll valve
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Fishfiles" data-source="post: 6252" data-attributes="member: 782"><p>You can change the controll valve spool with out removing the controll valve from the machine , I do it all the time to change the seals , I wouldn't consider it easy but pulling the valve out completely is hard , as mentioned I'd also bet that the bolt holding the centering spring to the spool either came loose or broke , have never seen the spool break in two , but any thing is possible , if it did break there must be a reason for it , something jamming it up like when the bolts that hold the centering spring cao come out , or the ears of the cap breaking off allowing the spool to float back and forth in the bore , I have seen them bend from that , a 1/4 inch drive 3/16 allen socket and a spinner really helps this job to get out the bolts , good luck</p></blockquote><p></p>
[QUOTE="Fishfiles, post: 6252, member: 782"] You can change the controll valve spool with out removing the controll valve from the machine , I do it all the time to change the seals , I wouldn't consider it easy but pulling the valve out completely is hard , as mentioned I'd also bet that the bolt holding the centering spring to the spool either came loose or broke , have never seen the spool break in two , but any thing is possible , if it did break there must be a reason for it , something jamming it up like when the bolts that hold the centering spring cao come out , or the ears of the cap breaking off allowing the spool to float back and forth in the bore , I have seen them bend from that , a 1/4 inch drive 3/16 allen socket and a spinner really helps this job to get out the bolts , good luck [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
743 hydraulic controll valve
Top