Reply to thread

Message: <blockquote data-quote="fairmountvewe" data-source="post: 38860" data-attributes="member: 4641"><p>I literally just finished putting the aux control rod on my 743 between the hydraulic valve and the steering lever. Not the easiest I have ever done. You may want to open up the cab (2 bolts in the front corners of the cab), and check to make sure the operating rod is there. It should go from a gimbel mount on the steering lever to the bottom section of the hydraulic valve. I can get a picture if you need it. Good luck.</p></blockquote><p></p>