Reply to thread

Message: <blockquote data-quote="mkueffler" data-source="post: 91409" data-attributes="member: 2436"><p>there are two wires that run from this fuse to the gauge cluster on the upper right corner of the machine. the yellow with brown strip goes to the hour meter, I disconnected the hour meter and no change. the other red and white striped wire goes to the other gauges if this fuse blows, the machine will not turn over, so I installed a toggle switch in place of the fuse so I could crank the engine over long enough to start the machine. once the machine is running it don't matter if the fuse I blown. but I don't have the hour meter and other gauges operational. if this just powers this gauge cluster, I don't understand how it affects the starter. I'm headed to the shop to troubleshoot this some more. thanks in advance for any advice/help here!</p></blockquote><p></p>