Reply to thread

Message: <blockquote data-quote="foton" data-source="post: 112080" data-attributes="member: 16041"><p>the gauge has to match the sending unit as ohm readings go. there is no standard with these things so the one we got was a marine type universal one that would reach the bottom of the tank, with these things one has to be careful to make sure that you have the sending unit arm just right so it does not rub on the side of the tank , they are so narrow , factory bobcat is pricy . aftermarket marine around 30 bucks, not a bad job to do either really.</p></blockquote><p></p>