Reply to thread

Message: <blockquote data-quote="pondfishr" data-source="post: 15822" data-attributes="member: 225"><p>Latest update. Worked the machine this past weekend and the noise is still there but seems to come and go. It is the worst when you raise the lift arms. One thing that was weird was the right side seemed to be really hard to hold forward going up a hill and the left side seemed considerable easier but it seemed to level out the longer it was ran. I changed the short water hose on top of the V-1702 engine this evening and let the motor idle to check for leaks. I could hear a little thump in the hydro every now and then. The machine was sitting still at low rpm idle with the brake on but not loading the pump. The other bit of good news is we adjusted the creep out by reversing the pucks when we did the axle seals. I guess I will still run it to try to work all of the air out. I just wanted to run the progress by the folks here in the forum.</p></blockquote><p></p>