Reply to thread

Message: <blockquote data-quote="brdgbldr" data-source="post: 81444" data-attributes="member: 7474"><p>There are actually 2 holes that you can reach the u-joints from on the right side as you are laying on the pump. Unless you have a really skinny arm reach around as far right as you can and then back to the left to the u-joint. The hardest part is getting the zerks in the proper position once you get that done you can get the grease gun extension hose on by feel. I've found that the grease gun extension hose gets so greasy that keeping pressure on it to keep it on the zerk is near impossible especially if you are trying to get tough old grease out of the u-joint. I've had to put hose clamps near the end of the extension so I have something to push against. Good luck</p></blockquote><p></p>