Reply to thread

Message: <blockquote data-quote="fedwards" data-source="post: 59751" data-attributes="member: 7700"><p>OK problem solved!! I machined a piece of flat stock to fit in the splines of the gearcase, with this now locked I tryed to spin the wheels and could not, so gearcase is good. I installed motor, and pump. While putting the unit all back together, I pulled all lines and hose. I had flushed fluid thru them befor, but this time I pulled them. Sure enough on one of the lines that go's to the right motor had blockage, fluid would go thru but not a fish tape. I forced out a piece of yellow plastic. Installed all lines, filled machine with oil and problem solved. Thanks to all of you who helped.</p></blockquote><p></p>