Reply to thread

Message: <blockquote data-quote="easyup" data-source="post: 81289" data-attributes="member: 11609"><p>I tied the above and the needle/seat was not close. My dealer order a carb kit for me and for $230 and an envelope came with 3 gaskets. Then they ordered a "valve" for $150 and I got a needle/seat that I could see through the plastic it was not anywhere close. Then sent photos to Bobcat to show them what they installed in my machine. I then went to a Carb/Fuel Inj. shop and they gave me several needle/seats to try, no charge as they were horrified at Bobcat's $ and lack of support. Finally, I was able on one of the seats to grind the 9mm nut on the seat down a couple of mm for clearance and bend the tab on the float and using the bowl site glass (thankyou Solex) as a guide get the float level right and get the machine running. Very sorry to say I lost track of the part numbers along the way.</p></blockquote><p></p>