Reply to thread

Message: <blockquote data-quote="jeepcreepcj" data-source="post: 51695" data-attributes="member: 5098"><p>The engine is coupled to the pump with splines on the yoke, it will just slide apart once everything else is undone. So the g32 had a casting in the block for the starter to mount to? If I remember correctly, the starter in the bobcat is positioned and attached by the motor mount plate where a bell-housing would have been. It could have been oriented anywhere there was room as long as it is on the same plane as the ring gear and the same distance from the center of the crank.</p></blockquote><p></p>