Reply to thread

Message: <blockquote data-quote="miscar" data-source="post: 29746" data-attributes="member: 3168"><p>Unique is not the correct term messed the f up is the term. At work today i figured out a few things one the pump 1 and pump 2 housing are either mounter 90 degrees out or they arent the original pumps. No wonder i noticed so many home made parts the linkages are completely swapped and the controls should be on the right side not the top , unfortunately when i get home now its dark and cold so working on this thing is limited.However i did snap a few pics of the whole thing tonight that hopefully ill be able to upload tomorrow ( usb cable at work ) before i tear into this thing to far is anyone aware of pumps that are 90 degrees out that will mount to a 632? or is it possible to mount the pumps 90 degrees out which is what im wondering if it isnt the case. Or even better is there someplace i could look for a serial number or manufacturer of the pumps that might be stamped into them and im missing it because of the oil and build up. Btw guys so far you have save me hours trying to figure out what is going on and thank you, i wondered what the indention was on the one control arm from the start given its not serving a purpose.</p></blockquote><p></p>