632 Foot Rest Pic

[slk]

Does anyone have a picture of the foot rest in a 632 or equivelant to it. This is where the rear of your foor would rest. Mine is rusted about the last 2 inches. Therefore when you put your foot on it it bends down. I can weld a piece on it if I know how it connects to the floor or bottom piece. This is not the foot pedals, but the rest for the rear of your foot. Thanks Steve

 

[Tazza]

What part has rusted out? The ones on my 743 were like that, i made new ones out of some sheet metal, cut to the rite sizes and MIG welded it back together. It has one bolt top and bottom to hold it in place. There was a slot cut in it for the pedal linkages to pass through from memory as well.

 

[slk]

What part has rusted out? The ones on my 743 were like that, i made new ones out of some sheet metal, cut to the rite sizes and MIG welded it back together. It has one bolt top and bottom to hold it in place. There was a slot cut in it for the pedal linkages to pass through from memory as well.

Thanks for the reply. That bit of info is what I was looking for. The one bolt at the bottom. I made a new piece and mig'd it to the old plate and drilled a hole for it to attach. I just did not want to cover that long 1" X 4" slot for drainage at the bottom. That is the area I was concerned about. It is painted up now and I will find some non slip material to put on the top half where the heal rest. Thanks Steve

 

[Tazza]

Thanks for the reply. That bit of info is what I was looking for. The one bolt at the bottom. I made a new piece and mig'd it to the old plate and drilled a hole for it to attach. I just did not want to cover that long 1" X 4" slot for drainage at the bottom. That is the area I was concerned about. It is painted up now and I will find some non slip material to put on the top half where the heal rest. Thanks Steve

Excellent, glad you got it all sorted out.