Reply to thread

Message: <blockquote data-quote="dfb" data-source="post: 124903" data-attributes="member: 11792"><p>I have not dealt with the Ford motor specifically but am familiar with a set up like the one shown in the pics below.The tensioner is most likely located on the slack side of the chain. To check this set up, take the coil wire off then try turning the motor back and forth with a breaker bar, first in the normal direction of rotation then the opposite way. If there is a problem with the tensioner not being able to take up the slack you will feel it as a lot of backlash. HTH.</p></blockquote><p></p>