I have a 2003 60xt with low (680) hours so plenty of sitting that I changed hydraulic fluid (10w-30) last year and now the final drive is noisy as you work it. Sounds like Shelby Stangas swamp buggy on AX MEN if you have seen the show. Everything seems to operate properly, gets jerky if you run the engine too fast and work to get the oil hot. Does not overheat just normal temps. Is the pump failing? filter need cleaning?
Only leak on the drive is direction control shaft is seeping a little.
Any and all suggestions are welcome, thanks
Only leak on the drive is direction control shaft is seeping a little.
Any and all suggestions are welcome, thanks