60XT BUCKET CONTROLS

[HOYTSHOOTER]

I now have an issue with the bucket controls on my 60XT. I have forward and reverse, but I can't lift or tilt the bucket. However, I have found a knob on the panel behind my right leg. When I pull the knob out, I can get the arms to raise and lower. But I still don't have the bucket tilt. Can someone tell me what the function of this knob is? Thanks.

 

[Gearclash]

Sounds like the safety interlock solenoids aren't getting power. Check the fuses. Good chance that one of the solenoids is bad also.

 

[markshop]

most likely the relay for the lockout selonoids . on your left by the fuses.

 

[Triplehfarms]

I believe the knob you refer to is an over ride for the loader arm control valve, in case you lose the ability to raise the loader arms. That over ride will allow you to raise the loader arms to get them out of the way so that you can tilt the cab forward to work on things.