Vanillagorilla413
Member
- Joined
- Dec 4, 2023
- Messages
- 8
Hello, I have a small 443 skid with a 3 cylinder kubota diesel d750 engine. When I got it it had new injectors and new glow plugs but it was only able to start with a shot of ether. It has ran good until I was loading a few yards of topsoil and died all of a sudden. I was able to restart it but it wouldnt stay running. I narrowed it down to the injection pump since fuel was barely coming to the surface of the 3 ports. I had the injection pump rebuilt and it still will not start, even with ether it fires and dies. I have fuel coming from the tank through the filter to the pump, from the pump to the injection pump, each port on the injection pump shoots fuel as each lobe opens and closes, and when the lines are cracked at the injectors fuel comes out. Still no luck, any ideas anyone?