Reply to thread

Message: <blockquote data-quote="thetool" data-source="post: 16077" data-attributes="member: 1534">Code 22-02 is "Starter relay output error on" which means that there is voltage going to the starter relay, but no signal back from the starter telling the computer that it received the current. Since the engine is cranking, the relay is working and the start circuit wire is intact.  That's the larger of two brown wires on the starter.  The smaller brown wire is the signal going back to the computer from the starter which it needs to see before the computer sends current to the fuel shutoff solenoid.  That wire, the smaller brown wire connected to the starter, is open somewhere between the starter and the controller........I think=)Good Luck</blockquote>