Reply to thread

Message: <blockquote data-quote="dirtmeister" data-source="post: 23981" data-attributes="member: 2575"><p>Thanks Fishfiles You got me thinking now. I will have to back up and start over, I have moved the hoses around on the pump no fix but didn't pay attention to if it change the way or what function would mess up worse. When i changed the hose it was one of the few that I could get to so no didn't get them crossed. I have a parts manual thet shows the hose schematics but hadn't thought of seeing which section goes to what part of pump. I'll try your sugestion and see what I come up with. My next step was to pull the pump and tear it down to see what I see. I'm a great machanic but lack hyd exsperiance I can take apart and put together anything but hyd are the dark side If I can see it I can understand but can't see inside hose to see whats happening. I'll also check the foot pedals didn't think of that. I did once have trouble thought the drive motors were going out had a hard time loading on the trailer not enough power. Figured out the linkage for the high/low speed fell off and was stuck in high. Thanks I'll let you know what I figure out.</p></blockquote><p></p>