277b hydraulic hose to pump routing

[Bill G]

I had to replace the coupler between engine and the hydraulic pump, I did not mark the 4 hoses that go to the track drive units, (2 from each side), I’m not sure which hose goes where. The are 2 long fittings toward the back and 2 toward the front of the pump, 2 on top and 2 on bottom. Have tried looking for a hose diagram but have found nothing that shows a good picture. Any suggestions?

 

[daniel_cogar]

I had to replace the coupler between engine and the hydraulic pump, I did not mark the 4 hoses that go to the track drive units, (2 from each side), I’m not sure which hose goes where. The are 2 long fittings toward the back and 2 toward the front of the pump, 2 on top and 2 on bottom. Have tried looking for a hose diagram but have found nothing that shows a good picture. Any suggestions?

Did you resolve this. I have the same issue and the cat diagrams don’t help any. I know this is old but I’m hoping you reply or someone with the same info