A few weeks ago this machine was used to move dirt and I know it was stalled out when pushing into a pile a few times. Since then the right side wants to creep ahead a little. A couple times it has killed when creeping ahead and was hard to start but the starter managed to turn it over . At low rpm it would want to creep ahead on the right side and stall out. We were careful to have it stopped completely and it would start fine. Hired help had it at 1/4 throttled and was just going to move it a little and it killed. Now it won't start. I burned up a starter trying to get it to go. Battery and starter are both now good. It cranks over for about a half second and then it's like the starter runs into a wall. All linkage is good and the shafts that attach to linkage are good. I jacked it up on blocks so the wheels are not holding the machine back and it didn't change anything. Is the hydro locked up? Is there a way to disengage the hydro and start engine? Thanks for any info
