2020 bobcat t770 injector code

[jessemead]

Got a 3000 hour machine with an injector code that pops up every couple machine hours. It is E000651-31, injector #1 fault.

Should I be worried? Just roll with it? What are options for repair?

 

[foton]

I would look at fixing it as if it goes bad completely it will put you in a limp mode, I have a different machine, but I had a problem with the wiring harness to the injectors ( open circuit to one injector) and it was a pain to find as it would come and go into limp mode. but your just might be the injector.

 

[jessemead]

Are there reman injectors for this machine? Do they need to a calibration at the dealer?

 

[foton]

reman. injectors should be set to the same specs. as new injectors, should be able to just put them in. and purge air out of fuel lines.

 

[Phil314]

ECU needs to be programmed with new injector. Injectors are self priming, you don't need to bleed them.