2013 T630 question

[Jjdescalzo]

Hello,

I just purchased a 2013 T630 from an auction. Seems to run well but after looking around the engine compartment I noticed an electrical plug that was disconnect and it doesn’t seem to connect to anything. It seems to branch out from the same group of wiring that goes to the rear lighting. I’m new to the skid steer world so I’m just hoping nothing important is missing. I’ve created a link to view a couple photos below. Thanks in advance.

 

[Jjdescalzo]

One more photo

 

[Bswwood]

One more photo

That is the communication plug. The dealer hooks up service analyzer to that plug to troubleshoot and diagnose the machine. There is usually a cover for it unless you have the 7 pin electrical connector on the front left of the boom. If that is the case look above the battery for the other side that leads down the boom.

 

[Jjdescalzo]

That is the communication plug. The dealer hooks up service analyzer to that plug to troubleshoot and diagnose the machine. There is usually a cover for it unless you have the 7 pin electrical connector on the front left of the boom. If that is the case look above the battery for the other side that leads down the boom.

Great. Thank you for the reply I appreciate it