2013 bobcat t870

[S&S Excavating]

Has anyone ever experienced a E000723-02 camshaft position sensor code or a E000636-08 crankshaft position sensor. When crank code throws the machine defuels and will only clear if it sits at idle along time or is shut off a long time. Any help is appreciated. Thanks

 

[walio123]

I doubt the two sensors have come to a halt at the same time. Check for bad, corroded connections in the connectors of the two sensors, broken wire in their circuits or bad engine ground. It is possible that one of them does not work correctly but has both errors. These sensors are magnetic ... you can not check them except with an oscilloscope or a bobcat tester and a laptop.

 

[S&S Excavating]

I doubt the two sensors have come to a halt at the same time. Check for bad, corroded connections in the connectors of the two sensors, broken wire in their circuits or bad engine ground. It is possible that one of them does not work correctly but has both errors. These sensors are magnetic ... you can not check them except with an oscilloscope or a bobcat tester and a laptop.

Thanks I'll take a look at that.