Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 19829" data-attributes="member: 782"><p>I doubt the bobcat part number is on the coil , bobcat numbers , except for bolts , fittings and orings , usually aways start with 66 so if the number starts like that it maybe , if you ask for a " hydraulic lock coil " which slides over the stem and explain it to them it will be no problem , it is a very common part to go out -------- the only mistake I could see them making is giving you the spool lock solinoid , which there are 2 of them , one for each function , they screw into the end of the controll valve and have a pin which locks the spool from moving , the foot pedals will be locked and not movable if the solinoids were not releasing , so make sure the know that is not what you want , I know you are a long way away so maybe ask them for a fax of a parts break down so you can see the part that you will be getting , I have a 250 service manuel but no part book to give you the part number , I have changed so many of them I can almost recall the number out my head , I am thinking 6664127 but don't go with that</p></blockquote><p></p>