2005 case 440 hydraulic buck creep question

[Nicwhitaker]

I have a 05 case 440. I have had a problem with the bucket creep. I have rebuilt both cylinders. I have changed the hydraulic filter. Also replaced the hydraulic fluid. I replaced the hydraulic valve with a used one I bought online a new husco valve is 2000$ I am still getting a little creep not much is there a adjustment on the stick or valve to get it to stop? The other control valve was scored badly and withna full load of dirt would drop rapidly it had to be replaced. Is it common for a little bucket creep when sitting with engine is running? Any ideas would help.

 

[Tazza]

It is normal for it to drop a few inches per hour without a bucket, but you shouldn't be able to notice it by picking up a load and sitting there for a few minutes......
If the rams were re-done and not scored inside, it has to be the valve or a load check in the valve. There really is nothing else.