Reply to thread

Message: <blockquote data-quote="Feedbag" data-source="post: 120460" data-attributes="member: 16996"><p>I have only read that the voltage to keep the fuel valve is around 5 volts, so u have a good point. I read that 12 volts is needed to pull the valve open, then 5 volts to keep it open. I worked with my brother today and we found that "pull" circuit is working perfectly. Still in question as to why the hold voltage is about the same. I read that the 12 volt is dropped out after it pulls open the valve because it could burn out the solenoid. I am still struggling with it.....</p></blockquote><p></p>