Reply to thread

Message: <blockquote data-quote="Blloyd83" data-source="post: 115465" data-attributes="member: 20224"><p>Hello Everyone. I have a 2004 Cat 247b and can't seem to figure out my mower attachment. I just bought a 2021 Wolverine Brush hog/cutter. I cannot get the mower to stay engaged unless I continuously hold down on the Right Joystick thumb switch. This is very tiresome when mowing a large field. It only works in the down position, photo shown here: https://photos.app.goo.gl/VWdX5dZdmqCNfqCe7 When I press the thumb switch up, it feels like the tractor is trying to pump fluid but it's blocked, it does not rotate. I can hear the hydraulic motor trying though. I'm assuming this is so that it cannot rotate backwards? With my landscape rake, up is the correct rotation. On the left joystick; bottom left button is what seems to be the continuous flow button, and based on researchI should be doing some sort of button pressing like this: 1. Press down on right joystick thumb switch 2. Press and hold left joystick bottom left button 3. Release right joystick thumb switch 4. Release left joystick bottom left button I've tried all combinations of this to no avail. What am I doing wrong here? In the shared photos I also included the different button I have available. Thanks for your help.</p></blockquote><p></p>