2002 s175 bobcat hydraulic leak

[johnperiera]

I have a 2002 s175 bobcat anyone no where i can get a parts brakedown manual. The problem i am having is a hydraulic leak. If your sitting in machine on right side under seat there is what i think is called the control valve its where all the hydraulic lines connect it also has 2 solenoids on top. The leak is coming from the green and red cap closest to engine. Where the green and red caps are each one is held on with 2 allenwrench screws. Before i replace gaskets and take apart i would like to know whats underneath. Thank John

 

[Tazza]

Your dealer will have a panual available.
There isn't a lot behind the cap, i think that is the tilt section.
You will loose oil no matter what you do, so position the machine in a suitable place. Remove the linkage at the front, remove the allen screws front and back. Remove the spool lock solenoid that should stick out the side of the control block near where the linkage is. Remove the rear cap, grab the spring and slide the spool out. Replace the seals front and back, ensure they go back the same way. Insert spool and screws.
Not that hard to do really, just keep it all clean