2002 bobcat 763 g auto level for lift arms gets stuck

[firecapt]

The auto level on the the lift arms (for level grading) will get stuck in the auto position. If i get lucky by jamming my foot down on front left pedal I can get it un stuck. It goes into the level position with ease ( back push of left pedal ). Any suggestions on the fix?

 

[7LBSSMALLIE]

i assume you are refering to the float position denent in lift spool . whats happened her is youre detent balls are corroded, in reality this is usually accompined by hyd leaks out the back and front seals, unless you are extremley mechanicly incilned i woud suggest you shop it i quote this at three hrs and about twenty bucks in parts usually do it in less and includes cleanining. (dont pull valve can be done in unit and can be tested, if you want to save a couple o bucks clean it prior to sendining in,

 

[Bobcatdan]

i assume you are refering to the float position denent in lift spool . whats happened her is youre detent balls are corroded, in reality this is usually accompined by hyd leaks out the back and front seals, unless you are extremley mechanicly incilned i woud suggest you shop it i quote this at three hrs and about twenty bucks in parts usually do it in less and includes cleanining. (dont pull valve can be done in unit and can be tested, if you want to save a couple o bucks clean it prior to sendining in,

I would agree with that, but would add to also check the likage. The lift pedal linkage that has a cross bar mounted on a pivot. If you havn't used float in a while it could be tight on the piviot. Wow 7 you work fast, I quote control valves at 6 hours, but that includes check out and cleaning.