Reply to thread

Message: <blockquote data-quote="GILL" data-source="post: 94695" data-attributes="member: 265"><p>I saw the machine in person yesterday. It does not creep, the pivot points appear tight, tire good etc. There are a few problems though. The cab must be twisted a little since the door does not seal at all on the top r/h corner. There is about a 3/8" gap at the corner. I can't see that its bent but something is wrong with that. The toothed bucket is junk. Holes worn in it etc. Looks like it may have been from another machine that was used in manure or something. The rest of the machine is pretty decent. Runs good, no apparent leaks that I could see looking past the engine with a bright flashlight. Battery is not that old. Door is a couple of years old since the original was stolen from a jobsight a few years back. That's all I can tell you about it for now. I turned the serial number over another member by pm yesterday and we'll see what he can tell us from that. Greg</p></blockquote><p></p>