Reply to thread

Message: <blockquote data-quote="mark753" data-source="post: 141787" data-attributes="member: 27232">Hi Guys,I hope someone can offer me a fix for my 2002 Bobcat 753g (triangle head lights).  When the machine is at idle all is good but soon after I give it some throttle, the oil pressure light comes on.  If I continue at a higher throttle, the engine will shutdown in a protection mode but will fire right back up and then we are living in groundhog day all over again.....  If I drop back to idle, the light goes off.  I have replaced the sensor and no change.  I put an oil gauge on it and have 60 psi at idle and 65+ at a higher RPM, so I know the oil pump is good.  I suspect it is the controller.  Here is the thing, everyone says the controller is in footwell on left side or behind a panel.  I do NOT have anything in the footwell and NO panel.  So it must be under the cab, right???  Follow the harnesses.  Can anyone point me to a place to purchase a new controller? Does it need programming?  Is this a Bobcat only part?Thanks for any help in advance!</blockquote>