Reply to thread

Message: <blockquote data-quote="vcci" data-source="post: 5568" data-attributes="member: 775"><p>I replaced the safety sensor for the bar where it pivots and that didnt take care of the problem. I also cheked all the fuses and sensors and they all seem fine. I checked the codes in the unit and was given codes 4-14, 5-14 and 5-15. They all refer to some sort of either engine pressure or hydrolic pressure which the machanic checked and all were fine. I am thinking maybe it's the whole electrical unit on the top tight of the dash, maybe that part is not good. The mechanic will replace with another 763 and maybe that will do it. I'm sure the problem is not a major one buy one of those annoying things that are hard to figure out. Is there anything else I should look for? Thanks for everything.</p></blockquote><p></p>