Reply to thread

Message: <blockquote data-quote="dadsbobcat" data-source="post: 85478" data-attributes="member: 12144"><p>Need a little advice from the expert bobcat mechanics that are familiar with the M610. After dad passed away I ended up with his old 610. Unfortunately I found in need of some immediate repair. I am a novice mechanic at best and was wondering if this is a project that suits someone with more experience. The coupler between the hydraulic pump and distributor drive has given out. I need both metal pieces and the rubber section. I have oil running from the case the distributor and rotor are in as well. Is it safe to say with the coupling wore out it also took out a bearing and or seal in the rotor housing as well. If anyone can cue me in on how big of a project this is I would greatly appreciate it. Anyone have a repair diagram and parts list? Are parts readily available for this machine? It is a 1972 model with the Wisconsin engineVH4D. Thanks again and I do appreciate any input or advice you can give me.</p></blockquote><p></p>