Reply to thread

Message: <blockquote data-quote="daddygoose" data-source="post: 49053" data-attributes="member: 5363"><p>i used a 1 3/4 socket on a breaker bar to turn the center shaft. im gong to have two hoses built so i can actually just take the good side of the hydrostatic pump and put over to the motor in question and do the same with the good motor. that way i can test both the motor and pump. i do know the right side of the machine will work. this seems like the best way to trouble shoot the system. i guess ill also try and turn the working side by hand and see if it gives the same resistance as the bad side since its blocked up. im hoping in all this i find a shered pin on the motor shaft or something simple like that .</p></blockquote><p></p>