Reply to thread

Message: <blockquote data-quote="Bobcatdan" data-source="post: 86368" data-attributes="member: 7339"><p>The dealer is an idiot. With service software it should not be hard figure out. First look at actual 5 volt voltage. If low, unplug each sensor on the circuit one at a time to see if it pops up to spec. If that doesn't solve it and wiring looks good, probably a bad controller. If its a hard fault, it should be easy to find. Intermittent faults can be the fun ones because first you have to get it to act up, then hope it is still in fault when testing. Then after repair hope like hell you have run it long enough to prove your repair worked.</p></blockquote><p></p>