Reply to thread

Message: <blockquote data-quote="Salbendidi" data-source="post: 65633" data-attributes="member: 9115"><p>I bought this machine with these codes. It has 0 passenger side operation. And when you use the driver side control which have very little response the passenger wheels just roll. The lift arms and tilt have no response at all. A new belt has been installed and set properly. Before it went into bobcat Regina it had low charge pressure. When it left it was extremly low charge pressure. They swapped out the charge pump. Which solved nothing. So they put the original back on. Bobcat Regina said " this machine is scrap metal. Trade it on a new 1". It left bobcat worse then before, tagged with a 4500 dollar bill. ( the guy I bought it from paid the bill). Can someone point me in the right direction. This machine has 4400 hrs. My next step was making sure the pickup isn't plugged off in the Hyd tank and making sure the pully isn't spinning on the pump shaft. Thanks in advance</p></blockquote><p></p>