Recent content by z06rick

Would anyone know if there are American made bearings inner and outer-made by timken or skf-with part numbers

does anyone know what year, bobcat switched over to the larger drive motors on a t250, t300 machine.

i also changed the hub oil-the fluid was a little dark-put it in a container with a magnet-no metal materials were found-replaced with bobcat fluid -measure the amount drained and was about the same going back in-dont know if this helps- could i be having a problem with bypass in the brakes

yes -thats is the filter i changed-the filter was about 40% clogged with silver flakes and looked like small black pcs hose-the machine has 2000 hrs on it-looking at connections and where filter comes a part in two-there were no wrench marks or and signs that it was ever apart before-dont think...

I know that i did get air in system-I let the machine idle for two hours and raised lowered and bucket every 10 min-then trammed the machine back in forth-i ran the gauge into the cab so I can keep an eye on it-The pressure stays constant at 290 lbs while using the machine other than when i put...

I just purchased a 2005 t300- ran the machine for 2days with no issues-I changed all the fluids-and filters including drive motor return and accesory filter with all bobcat products -motor oil filter, anti freeze and flushed 15 gallons of hydraulic fluid- The problem i am getting low pressure...