wildfan's latest activity

My father and I own a tree service and a machine shop. We used to repair cars a lot and have done general car repair since the beginning...

Thanks. It’s kind of a PITA to get to, but I will definitely check this out before the weather warms up. Last fall before I parked it, I...

The new sensor was purchased at Bobcat using my serial number. I do notice that on cooler mornings it shows no bars for a period but it...

One updated new aux. hydraulic control for one handle and a blank on the other. Installing to the newer version also required some minor...

I went to another dealer (Barron Supply) and they were extremely helpful and knowledgeable. They printed the bulletin for me and we...

I've been running this machine for about 10 hours and it still never goes over 1 bar. The engine definitely is not running hot. I had...

I've been running this machine for about 10 hours and it still never goes over 1 bar. The engine definitely is not running hot. I had...

Figured this one out. It wasn't cold enough. I would have thought the glow plugs would come on at 55 degrees or colder as my diesel...

Just to follow-up on this one. I purchased a new cylinder head from an internet outfit for about $300 (no core required). The head ended...

In case anyone else has a similar problem. After I pulled the drive motor, I noticed it had the new design carrier seal, so it was...

I should add, that there is no case drain filters on this early one. The drain case hydraulic line from the drive motor runs back to the...

I have 753(F) where I have a significant hydraulic oil leak around the drive motor flange to the carrier. The oil is definitely not...