Recent content by white91lx50

Thanks for the reply. I'd say it's definitely under that, as i can touch it and not burn my hand, or have to take it away. I'd guess it's 120-130f. Still need to track down my thermometer, been too busy actually using the machine! Temp is steady on the gauge, and I don't have any signs of...

I just went through my 7775 I picked up. Resealed the hydro pumps (had an input seal sucking air) So I just ran it today for about 45 minutes, everything seems well, charge pressure good at 125 psi. Hydraulic temp shows around 110 degrees on the cluster. I felt the charge pump, and I think its a...

Poked 1/4" holes in them, didnt really want to go any bigger. Anyhow filled the chain cases to the new fill point (2 9/16 up from edge of plate) stuck my camera in the fill hole and the modified bolt is submerged. Noticed it does not fill the gear boxes full to the check point in the cab...

I just picked up a '97 John deere 7775, and I'm doing tchain case/gear box mod so they share the same oil. Already modified the fill port, and I'm going to drill my own bolts, but just wondered if anyone happened to know what size hole it is from new holland. Thanks! Will

Just wanted to say hi, and This forum looks like a great source for information! I just picked up a '97 John deere 7775, a rebadged NH with a Yanmar engine from everything I've gathered. Shows 1600 hours, and the meter works, so either it is original or someone has replaced the instrument panel...