Recent content by Vintagecarlover

Where located?

Ever figure this out?

Sorry I wasn't getting notices of this thread. Multiple times I purchased Amazon shut off solenoids which work perfectly until warrantee runs out. Dealing with this again even though I bought one in August but never ran machine till yesterday. No surprise, didn't work when on machine or bench...

Following. What manual do you need?

It's an F machine with kubota v1903

I bought a package deal to add to my other 2 tired loaders. In package is a knocking v1903 in 751 bobcat and I can include a running v2203 for 1000. Additional dollars. What's the 751 worth as is? I can use the funds for a used harley rake or other attachments so thinking I might sell as is...

Did you find any info?

I'm looking to do this swap myself. There's a knocking v1903 in a project I recently bought. I have access to a reefer kubota L series v2203. Found someone who will buy my core so I'm gathering info and parts. I should be able to pull alot of needed parts if not all from the core cause v1903...

Quite a bit different although both have kubota desiels.

My problem ended up being a seat bar sensor. I used contact cleaner spray and penetrating spray and worked the seat bar and sprayed again and wallah! No more issues. No fake over heat issues, no fluid malfunctions, running as it should. Thx.

Ok, here's what I found. Seat bar sensor if it has crud on it will start acting stupid. Falsely overheats, hydraulic pressure and Temps go nuts, shuts machine down. Get a can of penetrating spray and spray the crap out of the sensor top bottom sides ect while working seat bar up and down then...

My problem started in the 80's when I bought my first air-cooled 911 Porsche and then started hording more of them. You'll be happy to know it's under control now and I'm down to 7 now with 2 storage units of parts. The problem is yesterday I bought 2 more bobcat skidsteers from a friend who...

What level How much was involved in pulling valve cover on 863? I lost compression on a cylinder and want to see why?