Recent content by Underwoodjd

The bushings and pins are worn out on the Bob Tach. I have purchased new bushings and pins. The tapers are OK so the pin installation easy easy. The bushings are another matter. I've read about a couple ways to remove the bushings. Welding a large nut to the bushing and using a slide hammer...

I have a 773 SN509645410 that has a hydraulic leak. The hose from the hydrostatic pump to filter (part # 6704159) has rubbed against the fitting off the back of the gear pump. Looking for comments about replacing this hose myself. This machine is for home/farm use and not making any money with...