Recent content by twerking

I have gotten the seat, belt and timer led to come on so that means all is ok correct? The only 2 that arent on are the start and solenoid valve led. Start will come on once i turn the key over. There is however a black wire coming from the control module that isn't connected to anything. I cant...

I have the same model new holland.... Where is the fuse box in the engine compartment? What ever is supplying power to the hydraulic solenoid valves isn't doing its job. I used a probe and sent power to bucket soleniod and bucket is working fine with probe. If anyone can tell me where to find...

OK... found the bucket solenoid. I took a probe and sent power to it and the bucket moves just fine. What powers the solenoid? Control module or is it getting power from a fuse box? If its a fuse box... where the hell is it? I thought maybe the valve was sticking but now i know the valves are ok.

Does anyone know where to get a seat with wiring harness and kick plate cover? They were removed by previous owner to fix the machine but ended up loosing them. Any help would be greatly appreciated!

Is the solenoid in the engine compartment right side wall under the starter solenoid?

Ok we are getting somewhere! I followed your procedure. Only thing i am not getting is the solenoid valve led. Where is this solenoid? This seems to be the problem. You have gotten me so close to victory, I can taste it!

Yes toggle is in right position. If i flip it ignition key will not start engine. Do you know by chance what kind of resistance the module is looking for? I have many types of resistors. 1k, 2k, 3k, 5k, 7k...?

Thank you for all your help! I looked on the Control module and I have 3 leds that stay on. There are 5 all together. i cannot read the labels. The ones that stay on are numbers 3, 4, and 5. What are these leds? Also the seat belt circuit should be good. as far as the seat sensor goes... i have...

Machine has been sitting for 3 yrs. Has Kubota motor. Drained hydraulic oil, changed filters, and refilled hydro oil. Machine moves great but boom and bucket wont move but 1 inch. I hear load on motor and no whinning sound from hydraulics. Both seat switches have been jumped out. Everyone is...