Recent content by trailblaser3

I tilted up the cab to check the wiring and discovered that there was about 6 inches of dirt in the bottom. It took me about four hors to dig and wash it out. I then wiggled all of the connections. After this it started up and I haven’t had any problem since.

I said I used 24 volts but I ment 12 volts.

It looks like a Caterpillar is the same as a Bobcat. I was able to start the machine by giving 24 volts to the red and white wires. As soon as it started I removed power from the pull wire and it kept run until I removed the power from the hold wire. The wire color changes at the plug. The wires...

My 246 skidsteer will crank over but will not start. The lift pump is delivering fuel up to the injector pump but nothing comes out of the injector pump. I think there is something wrong with the fuel shut off solenoid. Can any one tell me how to check the fuel solenoid? There are three wires...