Recent content by Tino550

Talked with them this morning and they said they ordered just a new o ring for the tube to test it and see if that’s where the oil is coming from, which makes no sense to me, if the motor has excessive blow by then a oil leak isn’t the problem we are looking for at this point!!! It’s been there...

Thinking that’s what they are going to try pull on me now, called today to try to get some info and the service woman in charge wasn’t there so I had to talk to the other office woman and she said she seen in the notes they had ordered a new filler tube and O-ring and at this point that’s going...

Just looks like normal used oil, changing the oil is the only service I haven’t done in the machine as I knew I was going to take it to bobcat to have the oil leak fixed so didn’t want to waste new oil because I thought it was coming from the oil pan and it may have to be drained, I’ve been...

I agree, right now I am having to wait for them to send the claim in and see if the Protection Plus warranty is going to cover it. I’ve only put 15 hours on the machine since I purchased it so hopefully bobcat is good about fixing it under that warranty that I bought and it isn’t a issue!

That is the plan, still waiting to hear from the warranty department

2018 T550 with 1830 hours, noticed a small oil leak on the right side of motor looking at it from the back side, bought the Bobcat protection plus warranty when I bout it back in September with 1815 hours so I figured I would take it and let them fix it, called today and was told that the o ring...

Having the same problem, start it up and shuts off, cranks and stays running the second time I crank it

I believe the oil pan drain line has rubbed a hole in itself, can this line be changed without pulling the motor out. I’ve googled and also checked the forum search bar and can’t find any info on this, Thanks

Ok I will see what I can figure out, is this a diagram of the steering linkage assembly? Thanks

Just bought a 2018 T550 with 1800 hours, steering levers feel stiff to me. Lifting and bucket function is fine. Got it out yesterday messing around and did a full 360 wide open and when doing so it will bog down and cut off if you keep pushing it. I’ve only ever ran older machines so stiffer...

New here and still trying to figure out the forum search so if this is already posted somewhere forgive me, I just bought a 2018 T550 with 1800 hours, the steering levers seem very stiff to me from the machines I've ran in the past, no problems lifting or bucket functions, got out yesterday...